| Using SpoutOff TEMPLATE simply draw an "X", cut the gutter and push the "tabs" down. If retrofitting, take out old outlet and center TEMPLATE over the hole. If installing new, use a hole saw to drill a hole in the center to make cutting the gutter easy. |
 |
 |
| Install SPOUT sliding the back flange up behind the gutter. Push SPOUT up tight against bottom of gutter and install 2 screws through back of gutter, through SpoutOff flange and into fascia. Install 2 Zip Screws through front of Spout into bottom front of gutter. {4 Basic parts in right photo} |
 |
 |
| Install Off into top of 3x4 downspout. Install 1 Zip Screw through each side of downspout into bottom of Off. 2nd photo shows how Off and Spout will fit together with a 4 inch overlap. This overlap secures downspout at its top. 3rd photo is OFF secured around Spout. |
|
| Install Base to support bottom elbow. 2nd photo shows how Clip pressure fits into Base. 3rd photo shows installation complete with Clip installed around bottom elbow. |
|
| Installations for both a B-Elbow and an Underground Pipe at bottom of downspout are very similar to A-Elbow SpoutOff installation. |
 |
 |
